Self Assembling nanites part one.

Top down: grind down a material into its wanted shape but creates waste. 

Bottom up: build slowly the intricate parts. 

A solid method is to create the nanites in a combined fashion. 

You’re building cubli’s. 

Use: pyrolysis carbon casing to be safe incase of failure inside the body and allow available attachments to drugs or operating tools. Cancerous bone is weak. (I believe so you may not need carbide tips to get through if going slowly enough). Sewing systems can join molecularly within the body at attachment points similar to spider web sacks joining together in series and rotated out with a twist to the nearest neighbor to continue the feed until the suture is done. 

Top down to manufacture housing and empty inside shell. A series of holes is drilled at each cross corner so as to not be totally flat, where you’ll later bond conductive material to electro magnetize those sides and corners using dip pen lithography.  

Waste is removed continuously and recycled into pure material once atomic slag is removed if any. 

Bottom-up using recycled innards plus additional materials to build control mechanics. 

Molecular beam epitaxy to lay films of atoms inside the inner workings in specific orders or “shells” until all moving and inert parts are manufactured and in place as warranted. Will have to ask the creators or a computer optimization algorithm to find the best method. Battery cells will have to be dropped into place and connected with dip pen lithography again. 

Build the system on a roll to roll “conveyer system” and you end up with the finished product at the end. 

Test outside body on cancerous white blood cells with users artificial cytokines and antibodies. Or coronaviruses.  Force them to encircle the viruses as artificial kill cells and use the batteries to heat the systems conductive materials with partial RBCs cellular make up on the drug attachment points that the corona wants to bond to and then heat to the viruses destruction point and the virus is eradicated from within with simple nanites. Remove dirty nanites from system. Clean. Repeat. 

Using cubli’s To deliver drugs against or with blood flow at any size including to fight bone marrow and lymphoma cancers. The first en mass medical nanites.

Here’s the basic design of them. I don’t know why this wasn’t done straight away.

Here’s the basic design. Three rotating sides against an inner torque mechanism to get it to jump. Or balance on one side. Or move in a controlled fall. If you place those inside an exterior set of shells including a medication you can do a myriad of healing things with them, while also controlling a series of them in succession or at once to sew from the inside out, deliver medicines as far as into the bone inside an implant that may or may not need to be removed later to treat bone cancer. Treat lymphomas by surrounding the white blood cells at their choke points or found areas of travel. Much less painful than chemo as you could irradiate the bot, have them hit their points of impact and then head to a port and attach, magnetically, through cancerous tissue collection, like collecting in a net—while flushing the user with fresh healthy white blood cells from their own stem cells so they don’t become continuously cancerous. 

These could easily be the first series of nanites used to treat all sorts of sicknesses. 

Hope you have a wonderful day/night.
-J.

Blue and red are poles of magnets also need corner attachments so that they can be “twisted or twisting” as they move within the body. Green would be the drugs/ tools to work within the body.

It’s about that simple. I can draw this up in solid works if you like.

Top down: grind down a material into its wanted shape but creates waste. 

Bottom up: build slowly the intricate parts. 

A solid method is to create the nanites in a combined fashion. 

You’re building cubli’s. 

Use: pyrolysis carbon casing to be safe incase of failure inside the body and allow available attachments to drugs or operating tools. Cancerous bone is weak. (I believe so you may not need carbide tips to get through if going slowly enough). Sewing systems can join molecularly within the body at attachment points similar to spider web sacks joining together in series and rotated out with a twist to the nearest neighbor to continue the feed until the suture is done. 

Top down to manufacture housing and empty inside shell. A series of holes is drilled at each cross corner so as to not be totally flat, where you’ll later bond conductive material to electro magnetize those sides and corners using dip pen lithography.  

Waste is removed continuously and recycled into pure material once atomic slag is removed if any. 

Bottom-up using recycled innards plus additional materials to build control mechanics. 

Molecular beam epitaxy to lay films of atoms inside the inner workings in specific orders or “shells” until all moving and inert parts are manufactured and in place as warranted. Will have to ask the creators or a computer optimization algorithm to find the best method. Battery cells will have to be dropped into place and connected with dip pen lithography again. 

Build the system on a roll to roll “conveyer system” and you end up with the finished product at the end. 

Test outside body on cancerous white blood cells with users artificial cytokines and antibodies. Or coronaviruses.  Force them to encircle the viruses as artificial kill cells and use the batteries to heat the systems conductive materials with partial RBCs cellular make up on the drug attachment points that the corona wants to bond to and then heat to the viruses destruction point and the virus is eradicated from within with simple nanites. Remove dirty nanites from system. Clean. Repeat. 

Thanks for your time,
-J.

Attempt at drawing out a neural network that could fight covid if all hospitals shared information at one point of time each day synchronized.

Basically that. You’ll have to read the other articles below this one to get the gist of what I was thinking and read this image from the bottom up for whichever reason.

A basic neural net from last night to fight SARS-COvid-02.

I’m unsure whether the main nodes extraneous markers need to be interconnected just for potential analyzation. The darker blue on the right side is the additional effects to be measured per layer one spoke. One spoke is location to next date marker so must continue in it’s own path on the left through the system. Connecting to location in layer three.
Layer two goes in both directions as the disease travel forms can change over time and on a whim.
Layer three is the splintering and conditional symptomatic change effect nodes.
The last node (blue) feeds into the next data set.